Attachment Hardware

  1. SAF (Seismic Anchoring Fittings) These fittings have many seismic sway brace applications. The hole in the tab can accommodate our gold, orange, and green cable without a thimble and with bolt hole sizes of 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1" & 1¼". SAFs may be used as connection fittings for anchorage to structure, or as connection to braced components. 
  2. SAFR (Seismic Anchoring Fitting Retrofit) These fittings are used in the same manner as the SAF, except that they are slotted to permit a hex nut on an existing component to be loosened, the SAFR positioned and the hex nut re-tightened. The SAFR is available for gold and orange cable. All of the bolt hole sizes from 1/4" through 5/8" are available.
  3. Zinc-plated oval sleeves are the fittings used to secure sizes gold, orange, green, and black seismic cable connections. Loos' Zinc-plated oval sleeves are the only acceptable method to make secure connections to Loos' Seismic Bracing Cable.
Part Number Size Notes
SAF-1/4 ¼" Seismic Anchoring Fitting
SAF-1/2 ½" Seismic Anchoring Fitting
SAF-3/8 3/8" Seismic Anchoring Fitting
SAF-5/8 5/8" Seismic Anchoring Fitting
SAF-3/4 ¾" Seismic Anchoring Fitting
SAF-7/8 7/8" Seismic Anchoring Fitting
SAF-1 1" Seismic Anchoring Fitting
SAF-1-1/4 1¼" Seismic Anchoring Fitting
SAFR-1/4 ¼" Seismic Anchoring Fitting Retrofit
SAFR-3/8 3/8" Seismic Anchoring Fitting Retrofit
SAFR-1/2 ½" Seismic Anchoring Fitting Retrofit
SAFR-5/8 5/8" Seismic Anchoring Fitting Retrofit
GO3-SLV for Gold cable Zinc Plated Oval Sleeve
OR4-SLV for Orange cable Zinc Plated Oval Sleeve
GR6-SLV for Green cable Zinc Plated Oval Sleeve
BL8-SLV for Black cable Zinc Plated Oval Sleeve